5 Reasons You Need Your Gas Fitter License (& how to get started now)

Been thinking you should get your gas fitter license, but dragging your feet on starting training? This post is for you.

We're breaking down all the ways a G3 or G2 license can seriously improve your job options in the trades.

We also include information on how training and certification works, so you'll have everything you need to take the next step.

So let's get started. Here are 5 very good reasons to get your gas fitter license this year...and a little inspiration to get off your couch and into a classroom!


1. Steady demand for gas fitters in Ontario

The Government of Ontario Job Bank says demand for gas fitters has been steady  in Ontario for the last 10 years. And they're predicting it will remain steady for the foreseeable future.

Gas Fitter gets 2 out of 3 stars for demand, which means "moderate growth" is expected for this trade across the province. This alone is a good reason to get certified, and start a career in this field.

gas technician certificationSource: Government of Canada Job Bank/Career Outlook Report

So what exactly does a gas fitter do? These tradespeople work for gas utility companies, gas servicing companies—and in the construction industry as building equipment contractors.

A typical day for a gas fitter is spent doing tasks like:

  • Installing, inspecting, and repairing gas lines and gas equipment (meters, regulators)
  • Installing and servicing gas heating units and components (burners, vales, and automatic controls)
  • Testing and replacing defective units and components
  • Dealing with gas escape calls and investigating accidents
  • Converting appliances to natural gas
  • Servicing gas appliances

What credentials do you need to legally work as a gas fitter in Ontario? You need a gas technician certification. You can start with a G3 level certificate—but a G3 only allows you to work on gas-fired equipment under supervision.

To work unsupervised, you need a G2 gas certification. Don't have either yet? Herzing offers a program that combines both.

You start with the G3, and then move on to earn your G2 within the same course. It's the most efficient way to quickly become a G2 certified gas fitter.


2. You Need Your G2 Technician License to Work in HVAC

Think you might pursue a career in HVAC? You'll definitely need your G2 to work in this trade. HVAC mechanics work on gas-fired equipment—and need to have a gas license to enter the field.

You must be certified to install, connect, and repair appliances that run on natural gas or propane.

A quality HVAC program will include gas technician training in the courses, so you'll have everything you need by the time you graduate.

Our HVAC program runs for 52 weeks, and includes preparation for both G3 and G2—so even if you're a total beginner, you'll get the instruction needed to get certified.


3. Plumbers & Appliance Technicians Also Benefit from a gas fitter license

Want to compete for more appliance repair jobs? Looking to expand your career options as a plumber? You need a gas technician certificate.

Only certified appliance technicians and plumbers can install and service gas-fired units.

This is why skilled trades schools often combine plumber and gas tech training. These pre-apprenticeship programs include courses for the plumbing side, while preparing students for the G3 exam.

You can do a straight plumbing program—but why not get your G3 while you're at it? G3 is the beginner level, but you'll still be legally allowed to:

  • work under supervision on appliances up to and including 400,000 British Thermal Units per Hour (BTUH)
  • install, activate, test, and purge gas piping or tubing less than 2 1/2 inches in diameter
  • reactivate a previously installed or converted appliance
  • clean and lubricate an appliance
  • clean, remove, or replace a vent connector, venting, or draft control device

4. Just Want More Job Options in the Trades?

Get your gas fitter license and you'll simply have more job options, period. You can become a gas technician, gas pipe fitter, gas appliance technician, or enter the air conditioning/refrigeration field.

Combine gas technician training with another trade, and automatically double your career prospects. It just makes good sense.


5. Gas Technician Training Starts at Just 12 Weeks

It doesn't take long to earn the first level of gas technician certification. You can complete a G3 training program in just 12 weeks. This is the starting point for gas technicians in Ontario.

Your courses will prepare to challenge the certification exam with the Technical Standards and Safety Authority (TSSA).

Check out this post for information on the TSSA exams: Becoming a Certified Gas Technician: 6 Things to Know About the TSSA Exams

Once you've got your G3, you can move on to gas technician 2 training. This program picks up where the G3 left off, with more advanced training on gas-fired equipment.

It takes 24 weeks to get your G2. Once you pass the TSSA exam, you'll be legally qualified to supervise G3-holders, and work independently on gas lines, meters, regulators and appliances with an input up to 400,000 BTUH.

You can stop there, and start building your career as a certified gas fitter—or use your G2 to expand your job options in another skilled trade (like plumbing or HVAC).

After gaining a few years of experience, you could even challenge the G1 gas technician exam. You need 4000 hours of G2 work experience to qualify for this level of certification.

Get your G1, and you'll be legally allowed to work on any type of gas-fired equipment.


Get started with gas technician training

So there you have it. Some very compelling advantages to getting your gas fitter license...and a very small investment of time to get started.

Ready to get moving? If you've never taken gas training, your first step is to enrol in a G3 program. We recommend the combined G3 and G2 training, which takes you through both levels in one course.

Have questions?

Click below to explore the TSSA-approved Gas Technician program. Get detailed course info and chat live with Admissions.

Explore Gas Technician Training, Level 3 & 2



Herzing College

Visit the Herzing College Blog

Most Read